Listing 1 - 10 of 2611 | << page >> |
Sort by
|
Choose an application
Superseded by C37.48-1997 As a supplement to the IEEE guide for application of expulsion fuses in enclosures, guidelines are provided for the application and maintenance of liquid-submerged and in-air expulsion fuses in enclosures. The operation of liquid-submerged fuses is also covered.
Choose an application
This part of IEC 62271 applies to all overhead, pad mounted, dry vault and submersible single or multi-pole alternating current automatic circuit reclosers and fault interrupters for rated maximum voltages above 1 000 V and up to 38 kV. Devices that require a dependent manual operation are not covered by this standard. In order to simplify this standard where possible, the term recloser/FI (reclosers/FIs) has been substituted for automatic circuit recloser or fault interrupter or both.
Choose an application
This part of IEC 62271 applies to all overhead, pad mounted, dry vault and submersible single or multi-pole alternating current automatic circuit reclosers and fault interrupters for rated maximum voltages above 1 000 V and up to 38 kV.
Choose an application
The grounding of dc equipment enclosures installed in dc traction power distribution facilities as well as related insulation treatments required for solid and resistance groundingmethods are covered in this standard. Guidelines are also given for material, installation, andtesting of insulation used in dc traction facilities and further recommended criteria for acceptability are provided. System grounding, though related, is not covered in this document.
Choose an application
The selection and application of controllers and automation to industrial and commercial power systems is covered by this recommended practice. It is likely to be of greatest value to the power-oriented engineer with limited experience with this equipment. It can also be an aid to all engineers responsible for the electrical design of industrial and commercial power systems.
Choose an application
Power Electronics & Drives, Power Conditioning, Renewable Energy, Control System and Applications, Signal Processing, VLSI, Industrial Instrumentation, Communication, Embedded Systems and Computational Intelligence.
Choose an application
With numerous new opportunities and challenges emerging from the topic of the cognition and control of complex systems, the methods related to PID control, or control based on a PID framework, will continue to grow and expand. This book covers some of the recent results that include improvements to the PID controller. Some examples of these improvements are as follows: •The novelty method of the variable, fractional-order PID controller •The optimization of PID controller, such as the hybrid LQR-PID controller by using genetic algorithm (GA) with the application for the control of helicopter systems •The optimized tuning approach of PID controller with disturbance rejection •A controller adjustment method based on the internal product of PID terms •The PI-PD controller, incorporated with the model-based feedforward control (FF) and the disturbance compensator (Kz), which is used for the control of magnetic levitation systems •The proper control with PID framework used to improve the cognition or identification for complex systems.
Choose an application
Choose an application
Choose an application
Listing 1 - 10 of 2611 | << page >> |
Sort by
|