Listing 1 - 10 of 10 |
Sort by
|
Choose an application
This Special Issue consists of seven papers that discuss how to enhance mobility management and its associated performance in the mobile-oriented future Internet (MOFI) environment. The first two papers deal with the architectural design and experimentation of mobility management schemes, in which new schemes are proposed and real-world testbed experimentations are performed. The subsequent three papers focus on the use of software-defined networks (SDN) for effective service provisioning in the MOFI environment, together with real-world practices and testbed experimentations. The remaining two papers discuss the network engineering issues in newly emerging mobile networks, such as flying ad-hoc networks (FANET) and connected vehicular networks.
Film, TV & radio --- flying ad hoc network (FANET) --- mobile ad hoc network (MANET) --- highly dynamic --- periodical --- topology change awareness --- routing protocol --- mobility management --- architecture --- implementation --- experimentation --- EU–Korea testbed --- SDN --- DASH --- QoE --- HTTP/3 --- QUIC --- traffic signal control --- shared lane --- control strategy --- vehicle-to-infrastructure --- variable lane line --- cloud computing --- management --- middle box --- placement --- resource --- vendor-agnostic --- virtual machine --- VM --- affordable playground --- hyper-converged SmartX Box --- distributed resources --- multi-site and virtualized cloud --- software-defined networking --- DevOps automation --- ILNP --- identifier-locator --- mobile network --- roaming --- n/a --- EU-Korea testbed
Choose an application
This Special Issue consists of seven papers that discuss how to enhance mobility management and its associated performance in the mobile-oriented future Internet (MOFI) environment. The first two papers deal with the architectural design and experimentation of mobility management schemes, in which new schemes are proposed and real-world testbed experimentations are performed. The subsequent three papers focus on the use of software-defined networks (SDN) for effective service provisioning in the MOFI environment, together with real-world practices and testbed experimentations. The remaining two papers discuss the network engineering issues in newly emerging mobile networks, such as flying ad-hoc networks (FANET) and connected vehicular networks.
Film, TV & radio --- flying ad hoc network (FANET) --- mobile ad hoc network (MANET) --- highly dynamic --- periodical --- topology change awareness --- routing protocol --- mobility management --- architecture --- implementation --- experimentation --- EU–Korea testbed --- SDN --- DASH --- QoE --- HTTP/3 --- QUIC --- traffic signal control --- shared lane --- control strategy --- vehicle-to-infrastructure --- variable lane line --- cloud computing --- management --- middle box --- placement --- resource --- vendor-agnostic --- virtual machine --- VM --- affordable playground --- hyper-converged SmartX Box --- distributed resources --- multi-site and virtualized cloud --- software-defined networking --- DevOps automation --- ILNP --- identifier-locator --- mobile network --- roaming --- n/a --- EU-Korea testbed
Choose an application
This Special Issue consists of seven papers that discuss how to enhance mobility management and its associated performance in the mobile-oriented future Internet (MOFI) environment. The first two papers deal with the architectural design and experimentation of mobility management schemes, in which new schemes are proposed and real-world testbed experimentations are performed. The subsequent three papers focus on the use of software-defined networks (SDN) for effective service provisioning in the MOFI environment, together with real-world practices and testbed experimentations. The remaining two papers discuss the network engineering issues in newly emerging mobile networks, such as flying ad-hoc networks (FANET) and connected vehicular networks.
flying ad hoc network (FANET) --- mobile ad hoc network (MANET) --- highly dynamic --- periodical --- topology change awareness --- routing protocol --- mobility management --- architecture --- implementation --- experimentation --- EU–Korea testbed --- SDN --- DASH --- QoE --- HTTP/3 --- QUIC --- traffic signal control --- shared lane --- control strategy --- vehicle-to-infrastructure --- variable lane line --- cloud computing --- management --- middle box --- placement --- resource --- vendor-agnostic --- virtual machine --- VM --- affordable playground --- hyper-converged SmartX Box --- distributed resources --- multi-site and virtualized cloud --- software-defined networking --- DevOps automation --- ILNP --- identifier-locator --- mobile network --- roaming --- n/a --- EU-Korea testbed
Choose an application
This book provides extensive information about advanced control techniques in electric drives. Multiple control and estimation methods are studied for position and speed tracking in different drives. Artificial intelligence tools, such as fuzzy logic and neural networks, are used for specific applications using electric drives.
History of engineering & technology --- PMSM drive --- current control --- deadbeat predictive control --- equivalent input disturbance --- BSAII --- Euclidean distance --- energy management --- E-REV --- overhead transmission line --- UAV inspection --- safe distance --- multi-source data fusion --- adaptive threshold --- permanent magnet synchronous motor --- second-order sliding mode control --- cascade control --- robustness --- PMSM --- model predictive control --- parameter identification --- hybrid electric vehicles (HEVs) --- mode transition --- adaptive sliding mode control (A-SMC) --- clutch actuator --- PI observer --- fractional order proportional-integral-differential (FOPID) --- indirect vector control --- position control of motor --- induction motor --- sensorless control --- sliding mode observer --- RBFNN-based self-tuning PID controller --- I-f startup strategy --- PMLSM --- position sensorless control --- high-frequency square-wave voltage injection --- FIR filter --- maglev train --- automotive electric powertrain --- rotor position sensor --- resolver --- inductive position sensor --- eddy current position sensor --- Hall sensor --- magnetoresistive position sensor --- Hall sensors --- brushless direct current motor drive system --- power electronics --- industrial application --- integrated electric drive system --- electromechanical coupling --- harmonic torque reduction strategy --- quantized --- nonlinear systems --- time delay --- lyapunov approach --- real-time implementation --- neural fuzzy controller --- I-f control strategy --- fractional order control --- synergetic control --- sliding mode control --- motor drives --- advanced control --- power converters --- estimation --- sensor --- artificial intelligence
Choose an application
This book provides extensive information about advanced control techniques in electric drives. Multiple control and estimation methods are studied for position and speed tracking in different drives. Artificial intelligence tools, such as fuzzy logic and neural networks, are used for specific applications using electric drives.
History of engineering & technology --- PMSM drive --- current control --- deadbeat predictive control --- equivalent input disturbance --- BSAII --- Euclidean distance --- energy management --- E-REV --- overhead transmission line --- UAV inspection --- safe distance --- multi-source data fusion --- adaptive threshold --- permanent magnet synchronous motor --- second-order sliding mode control --- cascade control --- robustness --- PMSM --- model predictive control --- parameter identification --- hybrid electric vehicles (HEVs) --- mode transition --- adaptive sliding mode control (A-SMC) --- clutch actuator --- PI observer --- fractional order proportional-integral-differential (FOPID) --- indirect vector control --- position control of motor --- induction motor --- sensorless control --- sliding mode observer --- RBFNN-based self-tuning PID controller --- I-f startup strategy --- PMLSM --- position sensorless control --- high-frequency square-wave voltage injection --- FIR filter --- maglev train --- automotive electric powertrain --- rotor position sensor --- resolver --- inductive position sensor --- eddy current position sensor --- Hall sensor --- magnetoresistive position sensor --- Hall sensors --- brushless direct current motor drive system --- power electronics --- industrial application --- integrated electric drive system --- electromechanical coupling --- harmonic torque reduction strategy --- quantized --- nonlinear systems --- time delay --- lyapunov approach --- real-time implementation --- neural fuzzy controller --- I-f control strategy --- fractional order control --- synergetic control --- sliding mode control --- motor drives --- advanced control --- power converters --- estimation --- sensor --- artificial intelligence
Choose an application
This book provides extensive information about advanced control techniques in electric drives. Multiple control and estimation methods are studied for position and speed tracking in different drives. Artificial intelligence tools, such as fuzzy logic and neural networks, are used for specific applications using electric drives.
PMSM drive --- current control --- deadbeat predictive control --- equivalent input disturbance --- BSAII --- Euclidean distance --- energy management --- E-REV --- overhead transmission line --- UAV inspection --- safe distance --- multi-source data fusion --- adaptive threshold --- permanent magnet synchronous motor --- second-order sliding mode control --- cascade control --- robustness --- PMSM --- model predictive control --- parameter identification --- hybrid electric vehicles (HEVs) --- mode transition --- adaptive sliding mode control (A-SMC) --- clutch actuator --- PI observer --- fractional order proportional-integral-differential (FOPID) --- indirect vector control --- position control of motor --- induction motor --- sensorless control --- sliding mode observer --- RBFNN-based self-tuning PID controller --- I-f startup strategy --- PMLSM --- position sensorless control --- high-frequency square-wave voltage injection --- FIR filter --- maglev train --- automotive electric powertrain --- rotor position sensor --- resolver --- inductive position sensor --- eddy current position sensor --- Hall sensor --- magnetoresistive position sensor --- Hall sensors --- brushless direct current motor drive system --- power electronics --- industrial application --- integrated electric drive system --- electromechanical coupling --- harmonic torque reduction strategy --- quantized --- nonlinear systems --- time delay --- lyapunov approach --- real-time implementation --- neural fuzzy controller --- I-f control strategy --- fractional order control --- synergetic control --- sliding mode control --- motor drives --- advanced control --- power converters --- estimation --- sensor --- artificial intelligence
Choose an application
Electrical power systems are evolving at the generation, transmission, and distribution levels. At distribution level, small generating and storage units—the so-called distributed energy sources (DERs)—are being installed close to consumption sites. The expansion of DERs is empowering renewable energy source integration and, as a consequence, new actors are appearing in electrical systems. Among them, the prosumer is a game-changer; the fruit of the behavior transformation of the consumer who has not only the ability to consume power but also to produce it. Microgrids can be understood as DER installations that have the capability of both grid-connected and grid-isolated operation. During the last decades, there has been a significant deployment of microgrids (e.g., in countries like the United States, Switzerland, and Denmark) and a consequent increase in renewable energy generation. This is contributing to the decarbonization of electrical power systems. However, the variability and intermittency of renewable sources introduce uncertainty, which implies a more complex operation and control. Taking into account that existing and future planned microgrids are being/going to be interconnected to the current electrical network, challenges in terms of design, operation, and control at power system level need to be addressed, considering existing regulations.
energy management system --- buck-boost converter --- generic object oriented substation event (GOOSE) communication --- stochastic optimization --- optimal dispatch --- decision tree --- coordinated control --- optimization --- congestion problems --- distributed optimization --- IEC 61850 Standard --- distributed energy resources (DERs) --- technical and economic optimization --- reliability evaluation --- power quality disturbances --- renewable --- DC microgrid --- HESS --- ruleless EV --- extension theory --- network planning --- integrated electrical and thermal grids --- reliability --- photovoltaic feasibility --- flexibility --- microgrid test facility --- microgrid --- multiresolution --- small-scale standalone microgrid --- IEC 61850 --- direct search method (DSM) --- maximum electrical efficiency --- load frequency control (LFC) --- droop control --- flexible generation --- grid independence --- frequency control --- particle swarm optimization --- battery storage --- microgrid stability controller (MSC) --- doubly fed induction machine --- coordinative optimization of energy --- power distribution --- hierarchical control scheme --- grounding --- operation --- electric energy market --- nonlinear programming --- cost and life --- total sliding-mode control --- distributed energy resource --- vehicle information system --- peak-cut --- smoothing wind power --- genetic algorithm --- medium-voltage networks --- vehicle-to-grid --- devices scheduling --- microgrids --- energy storage --- electric vehicle --- energy efficiency --- active filter --- embedded system --- multivariable generalized predictive control (MGPC) --- load power sharing --- flywheel energy storage (FES) --- renewable sources --- telecommunication power management --- micro-grid --- smart inverter --- distributed generation --- storage systems --- electric vehicle (EV) --- microgrid (MG) --- mesh configuration --- residential users --- renewable energy source --- radial configuration --- S-transform --- optimal power flow --- solid oxide fuel cell --- vehicle-to-grid (V2G) --- communication delay --- current harmonic reduction --- smart grids --- inrush current --- flexible and configurable architecture --- optimal capacity --- ESS effective rate --- smart grid --- multi-agent --- distributed energy resources --- regular EV --- peak-shift --- datacenter --- deterministic optimization --- plug and play --- chaos synchronization detection --- residential power systems --- power quality --- combined power generation system --- DC distribution --- isolated grid --- coordinated control strategy --- DC architectures --- predictive control --- demand-side management --- distributed generation (DG) --- curtailment
Choose an application
Preface Several countries have recently realized that the present paradigm of development in environmental and energy fields is unsustainable. As global awareness of environmental issues grows, governments worldwide are promoting policies which aim to limit the harmful effects of human development on the environment. In particular, these novel policies seek to address the rapid increase of the global temperature (especially in the polar regions) as well as to manage human plastic waste accumulating in seas. To resolve these issues will require a number of actions to be implemented; unfortunately, the recent COP 24 Conference was unsuccessful in establishing a global agreement to achieve these actions. In order for the upcoming 2020 COP 26 Conference to be successful in creating such an agreement, the scientific community must support the policymakers’ efforts. Within this framework, it is necessary to show the efforts of countries worldwide as they try to negotiate an agreement to increase the energy efficiency and reduce greenhouse gas (GHG) emissions. In addition, the research reports generated can provide quantitative measures of the necessary actions to be implemented in order to address sustainable and efficient energy use. Among other topics, the papers presented in this issue investigate innovations in novel efficient and environmentally friendly technologies mainly based on renewable energy sources. The study also highlights the different sectors involved in this task, such as energy conversion systems, urban areas, mobility, sustainability, water management, social aspects, etc. In this field, the Sustainable Development of Energy, Water and Environment Systems (SDEWES) conference provides the foremost forum for discussion on these topics. The 13th Sustainable Development of Energy, Water and Environment Systems Conference was held in Palermo, Italy in 2018. This Special Issue of Energies, precisely dedicated to 13th SDEWES Conference, features papers in three main topics: Energy policy and energy efficiency in urban areas, energy efficiency in industry, biomass and other miscellaneous energy systems.
Research & information: general --- sewage sludge --- torrefaction --- steam gasification --- tars --- water recycling --- wastewater treatment --- environmental and energy performance --- life cycle assessment (LCA) --- crude oil refining --- high-efficiency cogeneration --- primary energy saving --- electricity from cogeneration --- paper industry --- GateCycle --- CO2 emissions avoided --- sinter --- porous media --- local thermal non-equilibrium --- exergy destruction minimization --- BP neural network --- genetic algorithm --- urban simulation --- photovoltaics --- heat pump --- co-generation --- heat demand analysis --- low-temperature district heating --- district cooling --- energy storage --- linear programming --- tropical climate --- integrated energy modelling --- energy system optimization --- temporal resolution --- energy planning --- variable renewable energy sources --- Discrete Element Model --- gas–solid flow --- heat transfer enhancement --- entransy dissipation --- numerical simulation --- optimization --- control strategy --- peak-shaving --- mCHP --- Stirling engine --- renewable energy --- energy consumption profile --- heavy truck traffic --- road transport --- liquefied natural gas (LNG) --- alternative fuels --- hydrogen --- hydrogen pipelines --- hydrogen transmission --- pipeline transmission --- pressure drop --- pinch analysis --- heat exchanger network (HEN) design --- plus-minus principle --- supply temperature --- disturbances --- maximum energy recovery --- bypass --- economic evaluation --- two-phase flow regime --- airlift pump --- void fraction --- image analysis --- efficiency optimization --- energy microgrids --- energy system integration --- smart building clusters --- hybrid renewable systems --- heat pumps --- district heating --- cogeneration --- natural gas --- natural gas regulation station --- turboexpander --- pressure regulator --- energy recovery --- energy conversion --- energy system analysis --- flue gas heat recovery --- exergy --- coefficient of performance --- thermoelectric generator --- organic rankine cycle --- district energy systems --- anaerobic digestion and composting --- circular economy --- energy return on investment --- hydrogen bioenergy --- food waste hierarchy --- biofuel --- CI engine --- combustion --- emission --- greenhouse gas --- jatropha biodiesel --- nanoparticle --- performance --- Covenant of Mayors --- indirect emission allocation --- local energy generation --- geoenergetics --- ground source heat pumps --- borehole heat exchangers --- thermal response test --- borehole thermal energy storage --- bioelectricity --- carbon capture --- negative emissions --- sugarcane --- biomass --- climate change --- wave energy converters --- Power Take Off --- EP4 --- latching --- wave flume --- floating --- moorings --- renewable electricity generation systems --- SDEWES 2018 --- chicken manure --- proximate and ultimate analysis --- energy potential --- sustainable smart city --- mathematical optimisation --- urban design --- bilevel modelling --- location theory --- traffic assignment --- infrastructure expansion --- building location --- sustainable development --- energy efficiency in industry
Choose an application
Preface Several countries have recently realized that the present paradigm of development in environmental and energy fields is unsustainable. As global awareness of environmental issues grows, governments worldwide are promoting policies which aim to limit the harmful effects of human development on the environment. In particular, these novel policies seek to address the rapid increase of the global temperature (especially in the polar regions) as well as to manage human plastic waste accumulating in seas. To resolve these issues will require a number of actions to be implemented; unfortunately, the recent COP 24 Conference was unsuccessful in establishing a global agreement to achieve these actions. In order for the upcoming 2020 COP 26 Conference to be successful in creating such an agreement, the scientific community must support the policymakers’ efforts. Within this framework, it is necessary to show the efforts of countries worldwide as they try to negotiate an agreement to increase the energy efficiency and reduce greenhouse gas (GHG) emissions. In addition, the research reports generated can provide quantitative measures of the necessary actions to be implemented in order to address sustainable and efficient energy use. Among other topics, the papers presented in this issue investigate innovations in novel efficient and environmentally friendly technologies mainly based on renewable energy sources. The study also highlights the different sectors involved in this task, such as energy conversion systems, urban areas, mobility, sustainability, water management, social aspects, etc. In this field, the Sustainable Development of Energy, Water and Environment Systems (SDEWES) conference provides the foremost forum for discussion on these topics. The 13th Sustainable Development of Energy, Water and Environment Systems Conference was held in Palermo, Italy in 2018. This Special Issue of Energies, precisely dedicated to 13th SDEWES Conference, features papers in three main topics: Energy policy and energy efficiency in urban areas, energy efficiency in industry, biomass and other miscellaneous energy systems.
Research & information: general --- sewage sludge --- torrefaction --- steam gasification --- tars --- water recycling --- wastewater treatment --- environmental and energy performance --- life cycle assessment (LCA) --- crude oil refining --- high-efficiency cogeneration --- primary energy saving --- electricity from cogeneration --- paper industry --- GateCycle --- CO2 emissions avoided --- sinter --- porous media --- local thermal non-equilibrium --- exergy destruction minimization --- BP neural network --- genetic algorithm --- urban simulation --- photovoltaics --- heat pump --- co-generation --- heat demand analysis --- low-temperature district heating --- district cooling --- energy storage --- linear programming --- tropical climate --- integrated energy modelling --- energy system optimization --- temporal resolution --- energy planning --- variable renewable energy sources --- Discrete Element Model --- gas–solid flow --- heat transfer enhancement --- entransy dissipation --- numerical simulation --- optimization --- control strategy --- peak-shaving --- mCHP --- Stirling engine --- renewable energy --- energy consumption profile --- heavy truck traffic --- road transport --- liquefied natural gas (LNG) --- alternative fuels --- hydrogen --- hydrogen pipelines --- hydrogen transmission --- pipeline transmission --- pressure drop --- pinch analysis --- heat exchanger network (HEN) design --- plus-minus principle --- supply temperature --- disturbances --- maximum energy recovery --- bypass --- economic evaluation --- two-phase flow regime --- airlift pump --- void fraction --- image analysis --- efficiency optimization --- energy microgrids --- energy system integration --- smart building clusters --- hybrid renewable systems --- heat pumps --- district heating --- cogeneration --- natural gas --- natural gas regulation station --- turboexpander --- pressure regulator --- energy recovery --- energy conversion --- energy system analysis --- flue gas heat recovery --- exergy --- coefficient of performance --- thermoelectric generator --- organic rankine cycle --- district energy systems --- anaerobic digestion and composting --- circular economy --- energy return on investment --- hydrogen bioenergy --- food waste hierarchy --- biofuel --- CI engine --- combustion --- emission --- greenhouse gas --- jatropha biodiesel --- nanoparticle --- performance --- Covenant of Mayors --- indirect emission allocation --- local energy generation --- geoenergetics --- ground source heat pumps --- borehole heat exchangers --- thermal response test --- borehole thermal energy storage --- bioelectricity --- carbon capture --- negative emissions --- sugarcane --- biomass --- climate change --- wave energy converters --- Power Take Off --- EP4 --- latching --- wave flume --- floating --- moorings --- renewable electricity generation systems --- SDEWES 2018 --- chicken manure --- proximate and ultimate analysis --- energy potential --- sustainable smart city --- mathematical optimisation --- urban design --- bilevel modelling --- location theory --- traffic assignment --- infrastructure expansion --- building location --- sustainable development --- energy efficiency in industry
Choose an application
Preface Several countries have recently realized that the present paradigm of development in environmental and energy fields is unsustainable. As global awareness of environmental issues grows, governments worldwide are promoting policies which aim to limit the harmful effects of human development on the environment. In particular, these novel policies seek to address the rapid increase of the global temperature (especially in the polar regions) as well as to manage human plastic waste accumulating in seas. To resolve these issues will require a number of actions to be implemented; unfortunately, the recent COP 24 Conference was unsuccessful in establishing a global agreement to achieve these actions. In order for the upcoming 2020 COP 26 Conference to be successful in creating such an agreement, the scientific community must support the policymakers’ efforts. Within this framework, it is necessary to show the efforts of countries worldwide as they try to negotiate an agreement to increase the energy efficiency and reduce greenhouse gas (GHG) emissions. In addition, the research reports generated can provide quantitative measures of the necessary actions to be implemented in order to address sustainable and efficient energy use. Among other topics, the papers presented in this issue investigate innovations in novel efficient and environmentally friendly technologies mainly based on renewable energy sources. The study also highlights the different sectors involved in this task, such as energy conversion systems, urban areas, mobility, sustainability, water management, social aspects, etc. In this field, the Sustainable Development of Energy, Water and Environment Systems (SDEWES) conference provides the foremost forum for discussion on these topics. The 13th Sustainable Development of Energy, Water and Environment Systems Conference was held in Palermo, Italy in 2018. This Special Issue of Energies, precisely dedicated to 13th SDEWES Conference, features papers in three main topics: Energy policy and energy efficiency in urban areas, energy efficiency in industry, biomass and other miscellaneous energy systems.
sewage sludge --- torrefaction --- steam gasification --- tars --- water recycling --- wastewater treatment --- environmental and energy performance --- life cycle assessment (LCA) --- crude oil refining --- high-efficiency cogeneration --- primary energy saving --- electricity from cogeneration --- paper industry --- GateCycle --- CO2 emissions avoided --- sinter --- porous media --- local thermal non-equilibrium --- exergy destruction minimization --- BP neural network --- genetic algorithm --- urban simulation --- photovoltaics --- heat pump --- co-generation --- heat demand analysis --- low-temperature district heating --- district cooling --- energy storage --- linear programming --- tropical climate --- integrated energy modelling --- energy system optimization --- temporal resolution --- energy planning --- variable renewable energy sources --- Discrete Element Model --- gas–solid flow --- heat transfer enhancement --- entransy dissipation --- numerical simulation --- optimization --- control strategy --- peak-shaving --- mCHP --- Stirling engine --- renewable energy --- energy consumption profile --- heavy truck traffic --- road transport --- liquefied natural gas (LNG) --- alternative fuels --- hydrogen --- hydrogen pipelines --- hydrogen transmission --- pipeline transmission --- pressure drop --- pinch analysis --- heat exchanger network (HEN) design --- plus-minus principle --- supply temperature --- disturbances --- maximum energy recovery --- bypass --- economic evaluation --- two-phase flow regime --- airlift pump --- void fraction --- image analysis --- efficiency optimization --- energy microgrids --- energy system integration --- smart building clusters --- hybrid renewable systems --- heat pumps --- district heating --- cogeneration --- natural gas --- natural gas regulation station --- turboexpander --- pressure regulator --- energy recovery --- energy conversion --- energy system analysis --- flue gas heat recovery --- exergy --- coefficient of performance --- thermoelectric generator --- organic rankine cycle --- district energy systems --- anaerobic digestion and composting --- circular economy --- energy return on investment --- hydrogen bioenergy --- food waste hierarchy --- biofuel --- CI engine --- combustion --- emission --- greenhouse gas --- jatropha biodiesel --- nanoparticle --- performance --- Covenant of Mayors --- indirect emission allocation --- local energy generation --- geoenergetics --- ground source heat pumps --- borehole heat exchangers --- thermal response test --- borehole thermal energy storage --- bioelectricity --- carbon capture --- negative emissions --- sugarcane --- biomass --- climate change --- wave energy converters --- Power Take Off --- EP4 --- latching --- wave flume --- floating --- moorings --- renewable electricity generation systems --- SDEWES 2018 --- chicken manure --- proximate and ultimate analysis --- energy potential --- sustainable smart city --- mathematical optimisation --- urban design --- bilevel modelling --- location theory --- traffic assignment --- infrastructure expansion --- building location --- sustainable development --- energy efficiency in industry
Listing 1 - 10 of 10 |
Sort by
|